Select your language
AVAILABLE
Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
| Dimensions and weight 6SE7090-0XX84-0FF5 | |
|---|---|
| Weight | 0,05 kg |
| Height | 0 cm |
| Depth | 0 cm |
| Customs information 6SE7090-0XX84-0FF5 | |
| The 6SE7090-0XX84-0FF5 code is part of the PRODUCT GROUP 9610, and of the GROUP CODE R2S3 and of the PRODUCT CLASS C: products manufactured / produced to order, which cannot be reused or re-utilised or be returned against credit. | |
| SKU | 6SE70900XX840FF5 |
| UPC | 662643066067 |
| Custom Code | 85049090 |
| Export control provisions (ECCN) | ECCN : EAR99H / AL : N |
| Compliance with RoHs directives | Product is not RoHS-compliant |
| Reach Art. 33 Duty |
Lead CAS-No. 7439-92-1 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. Lead monoxide (lead ... CAS-No. 1317-36-8 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead monoxide (lead oxide) Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
|
| WEEE Take-Back Directive | In accordance with the WEEE Directive (2012/19/EU), the product is subject to the obligation of take-back at the end of its life. The manufacturer is responsible for the correct treatment and disposal of the industrial electronic product in accordance with current regulations. |
| 6SE7090-0XX84-0FF5 Product step | |
| Siemens has declared the product 6SE7090-0XX84-0FF5 obsolete since 30.09.2020, i.e. out of production | |
Siemens 6SE7090-0XX84-0FF5 – PROFIBUS CBP2 Communication Module for SIMOVERT MASTERDRIVES Motion Control
The Siemens 6SE7090-0XX84-0FF5 is a PROFIBUS CBP2 communication module designed to integrate SIMOVERT MASTERDRIVES Motion Control drives into industrial automation networks based on the PROFIBUS-DP protocol.
The module enables the cyclic exchange of process data, commands, parameters and diagnostic information between the drive and the higher-level control system.
Thanks to its PROFIBUS-DP interface, the 6SE7090-0XX84-0FF5 connects the converter to a PLC or automation system, providing reliable communication and centralised management of the drive’s main functions.
The product belongs to the established SIMOVERT MASTERDRIVES Motion Control range. Repairing and regenerating the module helps keep existing installations operational while reducing the risks and costs associated with electronic component obsolescence.
⚙️ Main features – Siemens 6SE7090-0XX84-0FF5
• Type: CBP2 communication module
• Series: SIMOVERT MASTERDRIVES Motion Control
• Communication protocol: PROFIBUS-DP
• Function: connection between the drive and the higher-level control system
• Transmission rate: up to 12 Mbaud
• PROFIBUS interface: 9-pin Sub-D connector X448
• Data exchange: PZD process data and PKW parameter data
• Diagnostics: status LEDs for monitoring communication and faults
• Power supply: internal, supplied by the basic unit
• Installation: in the slots provided on the compatible SIMOVERT MASTERDRIVES unit
• Configuration and diagnostics: via the drive parameters and Siemens tools compatible with the installed system
• Scope of delivery: supplied without operating instructions
🏭 Typical applications – Siemens 6SE7090-0XX84-0FF5
• Automated production lines with PROFIBUS-DP networks
• Plants equipped with SIMOVERT MASTERDRIVES Motion Control drives
• Machine tools and CNC systems
• Material handling and conveying systems
• Plants with multiple coordinated drives
• Lifting, winding and positioning systems
• Applications requiring centralised drive control
• Retrofitting and maintenance of existing industrial systems
🛠️ E-Repair services for Siemens 6SE7090-0XX84-0FF5
E-Repair provides a complete range of services for the Siemens 6SE7090-0XX84-0FF5, designed to support production continuity and obsolescence management:
🔧 Component-level electronic repair in our certified in-house laboratory
♻️ Electronic regeneration with restoration of operating conditions
🚚 Advance supply of a regenerated or new product, subject to stock availability
🛠️ On-site and remote technical assistance
💾 Backup and verification of configuration and communication parameters, where technically possible
🔍 Diagnosis of the PROFIBUS interface, X448 connector and the module’s electronic circuits
🌐 Technological cleaning using dedicated products and biodegradable solvents
✅ Functional testing and communication checks on a dedicated test bench
🔄 Support for replacement and obsolescence management of the SIMOVERT MASTERDRIVES range
✔ Standard 12-month warranty, extendable up to 24 months where applicable
➡️ All services are provided in accordance with the BS 8001:2017 and AFNOR XP X30-901:2018 circular economy standards and with ISO 14064-1 certification relating to Carbon Footprint, including Scope 3.
❓ Frequently asked questions – Siemens 6SE7090-0XX84-0FF5
Can I send my faulty 6SE7090-0XX84-0FF5 for repair?
✔️ Yes. After completing the request form, E-Repair Customer Care will provide all the necessary instructions for shipping the module to the laboratory.
Can I receive a 6SE7090-0XX84-0FF5 in advance?
✔️ Yes. If a new or regenerated module is available in stock, it can be shipped in advance to help reduce plant downtime.
Is the module tested before it is returned?
✔️ Yes. Every repaired or regenerated Siemens 6SE7090-0XX84-0FF5 undergoes electronic inspections and functional communication tests before delivery.
Is it possible to determine whether the fault is caused by the CBP2 module or the PROFIBUS network?
✔️ Yes. E-Repair can check the board’s power supply and electronic circuits, the X448 PROFIBUS connector, data exchange with the basic unit and the diagnostic LED indications. A complete system inspection should also include the wiring, connectors, network terminations, PROFIBUS address and master configuration.
Can the 6SE7090-0XX84-0FF5 be installed without reconfiguring the drive?
✔️ Not always. After installation, the module may need to be recognised and configured in the basic unit by checking the PROFIBUS address, communication parameters, telegram structure and firmware compatibility with the installed system.
🔗 For further information, visit the E-Repair Technical Guides
👉 E-Repair services for the Siemens SIMOVERT MASTERDRIVES range
👉 Maintenance guide for SIMOVERT MASTERDRIVES Motion Control
E-Repair assumes no responsibility for the accuracy of this information. Always consult the manufacturer for the most up-to-date instructions and information.
Torna IndietroTorna Indietro
GREEN CHOICE
Español (España) 
Deutsch (Deutschland) 
Français 
Italiano 
